|
 |
 |
 |
|
| MODEL
SS40210 |
|
|
|
| Description
: |
|
The Model SS40210 single ended
beam is ideally suited for harsh environments with its redundant
sealing of the strain gage area. The gage area is protected
with a water resistant potting material covered by a clamped-in-place
neoprene boot. This cell is recommended for low profile platform
scales, tank, hopper, bin weighing systems as well
as many other
process applications.
- 50 to 10K pounds capacity
- Dual sealing of gage area
- Stainless Steel Construction
- Low profile
- Replaces RTI 9102
- Factory Mutual (F.M.) Approved
|
|
| specifications
: |
|
| Standard
Capacities : (lbs.) |
50, 100, 200, 500, 1K,
2.5K, 5K, 10K |
| Excitation Voltage
: |
10VDC - Maximum 15VDC |
| Rated Output : |
2.0 mv/v ± 0.1% mv/v ( 2.5%
for 50 & 100 lbs.) |
| Non-Linearity : |
< 0.03% FSO (Full Scale Output) |
| Hysteresis : |
< 0.02% FSO |
| Non-Repeatability : |
< 0.01% FSO |
| Zero Balance : |
± 1.0% FSO |
| Bridge Resistance : |
350 ohms ±1 % |
| Safe Overload : |
150% of Rated Capacity |
| Temperature :
Compensated
Range :
Effect
of Output :
Effect
on Zero : |
0 - 150 deg. F
< 0.0008% FSO/deg. F
< 0.0011%
FSO/deg. F |
| Finish : |
Stainless Steel |
|
|
| dimensions
: |
|
| CAPACITY
(lbs.) |
A |
B |
C |
D |
E |
F |
G |
H |
I |
j |
k |
|
50-200
|
5.00
|
1.56
|
0.75
|
0.26
|
0.38
|
0.62
|
3.50
|
1.23
|
1.50
|
1.25
|
0.39
|
| 500-1K |
5.38 |
1.56 |
0.75 |
0.41 |
0.62 |
1.00 |
3.25 |
1.23 |
2.07 |
1.20 |
0.41 |
| 2.5K |
5.38 |
1.56 |
0.75 |
0.41 |
0.62 |
1.00 |
3.25 |
1.23 |
2.07 |
1.20 |
0.53 |
| 5k-10K |
7.28 |
2.16 |
1.38 |
0.66 |
0.75 |
1.75 |
4.03 |
1.70 |
3.47 |
1.56 |
0.78 |
|
|
|
|
| applications
: |
|
- Low profile platform scales
- Tank, hopper and Bin Weighing systems
- Process applications
|
| |
|
|
|
|
